AD 540 Commercial Dehumidifier Systems.
Suitable for rooms up to 300 cbm.
Max. dehumidiﬁ cation capacity >34 l/day.
Robust housing with stainless steel design.
2 fan speeds, adjustable hygrostat, operating hours counter, hose connection.
Optional: delivery or conversion with kilowatt hour counter, pump kit and wall bracket.
BlueDry® technology for operation at low humidity levels and temperatures.
The units can be stacked both during storage and operation
Applications of AD 520
Case made of coated sheet steel in stainless steel finish.
Dehumidifying performance / Power consumption*
at 30°C / 80% r.h. = 34,0 l/24h / 530 Watts/h
at 27°C / 60% r.h. = 11,0 l/24h / 430 Watts/h
at 20°C / 60% r.h. = 16,6 l/24h / 390 Watts/h
at 10°C / 70% r.h. = 11,4 l/24h / 330 Watts/h
Air circulation rate
Speed 1: 500 cbm/h
Speed 1: 625 cbm/h
Temperature: +1°C up to +34°C
Humidity: 35%r.h. up to 95% r.h.
51 dB (A)
230 V / 50 Hz
4.5 mtrs. with plug.
Display: kWh and operating hours, On-/Oﬀ-Switch, Display current / rated humidity
Optionally available accessories
Condensate drain hose 12 x 2 mm, Wall bracket, Pump-Kit
DIMENTIONS & INSTALLATION
Installation / mobility
Floor standing. Stability by four rubber bumpers. The units are stackable.
Put plug into power socket. Switch the dryer on at On/Oﬀ-switch and set the required humidity.
Easy to remove, carry and empty water collecting container (7,0 l.). Unit shutdown when bucket is full. Connection spigot for hose 12 x 2 mm.
Air inlet at the back side via air ﬁlter, air outlet on the front (draught-free, through slanted ﬁns)
clean / change air ﬁlter
Height / width / depth: 578 mm / 329 mm / 380 mm
APPLICANTION & FUNCTIONING
Mode of functioning
Condensation principle (heat-pump technology with energy recovery)
Area of use
Water damage drying, drying buildings, waterworks, storage, basement, garages, archives, etc.