AD 70 Swimming pool Dehumidifier.
Dehumidifier has high quality, slim cabinet model – as stand-alone unit or wall-mounted.
Suitable for swimming pools up to 40 m² (with pool cover) / 50 m² (without pool cover).
Max. dehumidiﬁcation capacity >62.4 l/day.
Fully automatic, silent operation (only 52 dB (A)).
Virtually maintenance free.
Slim design and athletic exterior.
Easy to install and use.
Applications of AP 70 Dehumidifier
Case made of inside and outside powder coated sheet steel
Dehumidifying performance / Power consumption*
at 30°C / 80% r.h. = 62.4 l/24h / 1000 Watts/h
at 27°C / 60% r.h. = 33.6 l/24h / 850 Watts/h
at 20°C / 60% r.h. = 24.0 l/24h / 720 Watts/h
at 10°C / 70% r.h. = 15.0 l/24h / 700 Watts/h
Air circulation rate
Temperature: +10°C up to +32°C
Humidity: 40%r.h. up to 95% r.h.
52 dB (A)
230 V / 50 Hz
Without (on-site electrical installation required)
On-/Oﬀ-Switch, orange, illuminated; neons for, defrost mode, humidity ok & thermal switch off, adjustable hygrostat
Optionally available accessories
Condensate hose 15 x 2 mm
socket for fresh air
DIMENTIONS & INSTALLATION
Installation / mobility
Installation can be wall mount or floor mount.
Electrical installation performed by Electrician. Put plug into power socket. Switch the unit on at On/Oﬀ switch and set the required humidity at the hygrostat.
Hose connector for hose 15 x 2 mm.
Air inlet at the front side, air outlet from top
Height / width / depth: 740 mm / 1024 mm / 261 mm
APPLICANTION & FUNCTIONING
Mode of functioning
Condensation principle (heat-pump technology with energy recovery)
Area of use
Swimming pools, whirlpool and sauna anterooms, gym and changing rooms.